451w to 650w @8 Ohm

Viewed products

Information

PSSO - Amp Set MK2 for Line-Array S

Amp Set MK2 for Line-Array S

Amp Set MK2 for Line-Array S

2 381,00 €

-

In Stock
Usually ships in 6 - 8 business days.

More info



10451684 PSSO DDA-1700 Amplifier

Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms

  • Stereo PA amplifier with class D circuitry
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
  • Limiter and speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 2 calibrated level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs and screw terminals
  • Rugged steel chassis with aluminum front panel
  • Housing design: (19") 48.3 cm rack installation 2 U

10451696 PSSO QCA-6400 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms

  • 4-channel PA amplifier with class I circuitry
  • 4 x 1400 W/4 ohms
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 4 level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
  • Neutrik Speakon outputs
  • Housing design: (19") 48.3 cm rack installation 2 U

10356362 PSSO DXO-26 PRO Digital Controller

Digital speaker management system with real-time network communication, 2 inputs and 6 outputs

  • Digital network speaker management system with 64-bit processing
  • Premium components ensure excellent sound-features
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 2 analog inputs and 1digital AES/EBU interface (XLR)
  • 6 analog outputs (XLR)
  • 10-band parametric EQ per input and output
  • Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • The intelligent software for PC and Mac allows convenient control with a computer
  • Full configuration and real-time network communication via the built-in Ethernet interface
  • Presets are easy to store, transfer and manage
  • Up to 80 user presets storable in the device via software
  • Control of all functions also possible via the controls at the front panel
  • Alphanumeric LCD screen with 2 lines of 16 characters each
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit VU meter
  • Mute switch with LED indicator per output
  • Up to 2000 ms signal delay adjustable for the inputs and outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase (180°)
  • Lock function for protecting the program settings
  • Rack installation, 1 U
  • Windows XP, Vista, 7, 8, 10 and Mac OS X 10.5.8 and better
  • Control your speaker systems more flexible than ever with the DXO Control app
  • DXO Control for iPad supports all functions of the PC software and is available for free from the app store
  • DSP: Digital signal processor
  • PC connect: DXO Software via USB; DXO Software via RJ45 (F) mounting version Firmware can be updated
  • Housing design: (19") 48.3 cm rack installation 1 U

30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U

U-front panel in different sizes

  • 1 mm steel, black, powder-coated
  • Weight 465-1350 g (depending on the version)
  • Housing design: 1 U

30109190 ROADINGER Rack Profi KM 6U 55cm with wheels

PRO flightcase for 483 mm units (19")

  • Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
  • Stomped profile rails for cage nuts
  • 2 removable covers (double-door version)
  • High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
  • Aluminum profile frames (30 mm) with rounded edges
  • Three-leg, medium-sized steel ball corners
  • 2 x recessed case handles with mounting dish and backing ring
  • 4 butterfly lock
  • 4 wheels with 2 brakes
  • 4 x chrome case handles
  • Available in different height units (1 U = 44 mm)
  • Transport aid: With wheels
  • Housing design: 6 U
  • Made in Europe


10451684 PSSO DDA-1700 Amplifier
Power supply:100-240 V AC, 50/60 Hz
Power consumption:150 W 1/8 power
Output power:2 x 850 W RMS (4 ohms)
2 x 500 W RMS (8 ohms)
Power connection:Mains input P-Con (blue), mounting version Power supply cord with safety plug (provided)
Frequency range:20 - 20000 Hz
S/N ratio:>100 dB
Circuitry:Class D
Connections:Input: 2 x line via 3-pin XLR
Output: 2 x line via 3-pin XLR
Output: 2 x Speakers via Speaker built-in socket (f)
Input sensitivity:39,3 dB; 37 dB; 32 dB switchable
Input sensitivity:ca. 0,775 V; ca. 1,0 V; ca. 1,81 V switchable
Distortion:<0,15 %
Housing design:(19") 48.3 cm rack installation 2 U
Width:48,3 cm
Height:8,9 cm
Depth:30,7 cm
Weight:6,00 kg
Damping factor:>500
Voltage gain:38.2 dB
Slew rate:>10 V/µsec
Protection:Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:protect, clip, -5 dB, -10 dB, -20 dB (per channel)
Construction:steel chassis, aluminum front
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
Power supply:230 V AC, 50 Hz
Power consumption:820 W 1/8 power
Output power:4 x 800 W RMS (8 ohms)
4 x 1400 W RMS (4 ohms)
2 x 2800 W RMS bridged (8 ohms)
Power connection:Fixed Power supply cord with safety plug
Frequency range:20 - 20000 Hz
S/N ratio:>80 dB
Circuitry:Class I
Connections:Input: 4 x line via 5-pin XLR
Output: 4 x line via 5-pin XLR
Output: 4 x Speakers via Speaker built-in socket (f)
Input sensitivity:38 dB; 32 dB; 26 dB switchable
Input sensitivity:ca. 0,775 V; ca. 1,0 V; ca. 1,4 V switchable
Distortion:<0,05 %
Housing design:(19") 48.3 cm rack installation 2 U
Width:48,3 cm
Height:8,9 cm
Depth:44,5 cm
Weight:13,45 kg
Power output (RMS):
2 ohms4 x 1600 W
4 ohms bridged2 x 3200 W
8 ohms bridged2 x 2800 W
Damping factor:>800
Slew rate:>10 V/µsec
Crosstalk:>65 dB
Voltage gain:40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance:20 kohms (balanced), 10 kohms (unbalanced)
Input connectors:4 x XLR
Output connectors:4 x Speaker, 4 x XLR feed-through output
Protection:Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling:2 temperature-controlled fans, front-to-rear
Controls:Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators:Protect, clip, signal (per channel)
Construction:Steel chassis, aluminum front panel
Rack installation with 2 U
10356362 PSSO DXO-26 PRO Digital Controller
Power supply:100-240 V AC, 50/60 Hz
Power consumption:10,00 W
Power connection:Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Frequency range:10 - 40000 Hz
DSP:Digital signal processor
Crossover frequency:20-20000 Hz
USB port:Typ B
Distortion:<0,005 %
PC connect:DXO Software via USB; DXO Software via RJ45 (F) mounting version Firmware can be updated
Housing design:(19") 48.3 cm rack installation 1 U
Width:48,3 cm
Height:4,45 cm
Depth:22,3 cm
Weight:2,45 kg
Analog inputs:2 x XLR, balanced
Maximum input level:+22 dBu
Input impedance:10 kohms
Dynamic range:118 dBA
Digital input:1 x AES/EBU (XLR)
Input impedance:110 ohms
Outputs:6 x XLR, balanced
Output impedance:50 ohms (electronically balanced)
Output gain range:-50 to +12 dB
Maximum output level:+12 dBu
Dynamic range:118 dBA
Sampling frequency:65 kHz
Filter types:Bessel, Butterworth or Linkwitz-Riley
Slopes:6, 12, 18 or 24 dB/octave
Delay:0 to 2000 ms (inputs/outputs)
Communication:LAN (TCP/IP), USB type B
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
Strength:1 mm
Mounting height:approx. 4,45 mm (1 U)
Housing design:1 U
Width:48,3 cm
Height:4,45 cm
Weight:0,30 kg
30109190 ROADINGER Rack Profi KM 6U 55cm with wheels
Maximum load:50 kg
Color:Dark brown laminated
Material:Birch multiplex 9 mm
Mounting width:483 mm (ca. 19")
Mounting height:approx. 275 mm (6 U)
Mounting depth:550 mm
Housing design:6 U
Width:53 cm
Height:43 cm
Depth:71 cm
Weight:20,00 kg

Reviews

Write a review

PSSO - Amp Set MK2 for Line-Array S

PSSO - Amp Set MK2 for Line-Array S

Amp Set MK2 for Line-Array S

Write a review