RGB laser system with a triple outlet...
Availability date: 01/01/1970
The Laserworld EL-200RGB is a RGB laser system with a total output power of up to 200mW.
The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of 3mm and a beam divergence of 2mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30°. About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be altered.There is an on-off switch at the rear side of this device.The triple laser outlet provides extra intensive red, green and blue beam effects.
The Laserworld EL-200RGB is a good solution for fist-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.
|power red:||>60mW / 650nm|
|power green:||>25mW / 532nm|
|power blue:||>60mW / 445nm|
|beam specifications:||ca. 3mm / 2mrad|
|laser source:||diode, DPSS laser|
|operation modes:||auto, music, DMX|
|scanner:||high-speed stepper motors, 2-5kpps|
|scan angle:||+/- 30° max.|
|basic patterns:||ca. 50 (layers, tunnels, fences, waves, etc.)|
|accessories:||power cable, manual|
|power supply:||85V - 250V AC|
|power consumption:||40 W|
*Warning: every device that includes a laser diode, needs to be shut down for at least 10 minutes for every 2 hours. In case of not following the given instructions, the laser diode may burn out and won't be accepted as a reason for warranty.