Platform Model TM440 without legs

Viewed products

Information

Guil - TM440/2x1

TM440/2x1

TM440 Modular platform for 50 x 50 mm legs. Maximum load of 1200 kg / m2. 2 x 1m Legs not included.

594.72€%14.41 You save 85.72€
509,00 €

Add to wishlist

In Stock

More info

Modular platform of high resistance, certified for loads of up to 1200 kg / m2 (2x1m: 2400 kg Uniformly distributed), made of extruded aluminum and 100% phenolic panel WISA® birch wood weatherproof, with non-slip finish and sealed edges. 2 Connectors included: 1 TMU-01 and 1 TMU-02.
* Possibility of painting the frame and legs in different colors.
TM440 Platforms offer the best solution for any type of event, from small floorboards to large stages, being able to be used in multiple configurations for both permanent (indoor) and temporary installations (concerts, theaters, auditoriums, podiums, walkways, conservatories, stands, decoration , etc.).

Thanks to its 100% birch phenolic board, weatherproof and its reinforced aluminum structure, TM440 pallets are perfect for outdoor use. The combination of all these characteristics makes the TM440 platform a very practical element for all those events that require high load resistance with a quick and easy assembly.

SECURITY GUARANTEED

Our TM440 pallets are certified for 1200 kg / m2 by the German certification company DEKRA (certificate No. C18.026G) under the following Standards:

• DIN 15921: 2015-09: Technical safety and testing requirements for the Aluminum Platforms and Frames of the Entertainment Industry.
• Directive 2001/95 / EC: Safety requirements for the products of the European Parliament of December 3, 2001
• DGUV Regulation 17: Installations and installations of Scenarios for the Entertainment Industry
• DGUV Rule 115-002: Stage installations and assemblies for the entertainment industry

These regulations require a safety factor of 1.95. Safety tests and load tests for the GUIL TM440 platform were carried out with 4,680 kg.
You can request all certificates from our Engineering department.

Our pallets do not need reinforcing bars, as their components guarantee maximum safety (reinforced profile, 100% birch wood and fixing elements); exceeding the load required in the regulations during the test tests.

FRAMEWORK

The TM440 platform is built with a strong aluminum frame with a high load capacity (EN AW 6063 80 –T6 alloy) with a special 94 mm profile with 4 reinforcement ribs.

Its multifunctional continuous guide design guarantees a quick and easy joining of pallets to each other and allows a simple and quick adaptation of a wide variety of accessories (handrails, access stairs, skirts, coverings, seats, etc).

The panel is fixed to the frame structure by means of three fastening systems: high fixing foam, 20 stainless steel screws, and silicone, thus avoiding possible noise and vibration and at the same time giving the platform a high resistance against the elements weather.

TRIPLE HOLDING SYSTEM from board to profile by:

* High fixing foam
* 20 stainless steel screws
* Silicone

The four brackets, built in high strength extruded aluminum, are fixed to the frame (each of them) by 4 M8 screws with self-braking nuts.

The squares are provided with a reinforcement protector with double utility:
- When placed directly on the floor (without legs) prevents friction and noise.
- When several pallets are stacked, avoid grating the platform where it rests.

The legs are housed in the brackets quickly and easily using the ergonomically designed metal knob; guaranteeing maximum fixation and resistance.

* Possibility of painting the frame in different colors.

BOARD

TM440 pallets are equipped with a 100% birch wood panel, 21 mm thick, from the Finnish manufacturer WISA®.
The panel, provided with a non-slip finish by means of a special hot printing, is composed of 15 layers glued with weather and water resistant phenolic resin (WBP).

Note: WISA® boards are screen printed with their brand so that they are distinguished from imitations.

The board is subjected to hydrophobic and flame retardant treatments, as well as treatments against commonly used chemical products. These features guarantee the highest strength and durability for both outdoor and indoor applications.

To make this panel safer and durable, all its edges have been sealed with acrylic paint avoiding moisture penetration.

Board certificates can be requested from our Engineering department.

The board used, manufactured ONLY with 100% birch wood, is specially designed for those applications where non-slip properties are required along with high wear resistance. The multi-layer construction ensures that the board is very compact and resistant.

The panel used complies with the following Regulations and Standards:

- EN 13986: 2004 + A1: 2015
- EN 314-2 / class 3
- DIN 53799
- DIN 5113

Our pallets are designed for indoor and outdoor use. Important: The panel of our platforms is waterproof, NOT WATERPROOF. In case of rain, humidity or other inclement weather, they must be disassembled and stored. They can endure short periods exposed to rain and humidity. They have not been designed to be used as a permanent outdoor installation where they can be exposed to extreme conditions throughout the year.

LEGS

GUIL manufactures six versions of legs with high strength aluminum, all of them with rounded edges:

PTA5-T: Telescopic legs adjustable millimeter by millimeter.
PTA5-D: Telescopic legs adjustable millimeter to millimeter with leveling spindle
PTA5-P: Telescopic legs with pin and leveling spindle
PTA-R: Telescopic legs with angle of inclination to make ramps and mounts with unevenness
PTA5-F: Legs for a fixed height
PTA5-N: Legs for a fixed height with leveling spindle

• Possibility of painting the legs in different colors. • Available with 60 × 60 mm legs. Contact us.

Ref. PTA5-T TELESCOPIC FEET

Legs made of high strength aluminum with an external profile of 50 x 50 mm and terminals made of non-slip rubber and fixed to the profile with double screws.

Its telescopic system allows to obtain multiple heights with a single set of legs (millimeter to millimeter adjustment), saving possible unevenness (stairs, ramps, etc.).

The legs are provided with an outer profile with 4 internal 4mm ribs and an inner profile with 9 internal ribs.

The height of the legs is fixed by a double safety lock; With the metal pressure knob, the desired height is adjusted and set, and as an additional safety measure, the legs are locked by means of an M10 nut, thus ensuring a total fixation of the height of the legs.

* Four-wheel sets available for use with telescopic legs (Ref. CQR / 5).

Ref. PTA5-D TELESCOPIC FEET WITH ADJUSTABLE SPINDLE

Legs made of high strength aluminum with 50 x 50 mm outer profile and stainless steel M12 spindle with double locking stainless nut.

The leg is provided with a disc injected in non-slip industrial rubber (not plastic), which guarantees a perfect fit to all types of surfaces and prevents marking / damaging the surface (floor, wood, etc.).

Its telescopic system allows to obtain multiple heights with a single set of legs (millimeter to millimeter adjustment), saving possible unevenness (stairs, ramps, etc.).

The legs are provided with an outer profile with 4 internal 4mm ribs and an inner profile with 9 internal ribs.

The height of the legs is fixed by a double safety lock; With the metal pressure knob, the desired height is adjusted and set and as an additional safety measure, the legs are locked by means of a nut, thus ensuring a total fixation of the height of the legs.
The final adjustment is made with the M12 stainless steel spindle, which is threaded to the leg by means of a stainless steel bushing (not directly to the leg profile)

Ref. PTA5-P TELESCOPIC FEET WITH PIN AND ADJUSTABLE SPINDLE

Legs made of high strength aluminum with 50 x 50 mm outer profile and stainless steel M12 spindle with double locking stainless nut.

The leg is provided with a disc injected in non-slip industrial rubber (not plastic), which guarantees a perfect fit to all types of surfaces and prevents marking / damaging the surface (floor, wood, etc.).

Its telescopic system allows to obtain multiple heights with a single set of legs (millimeter to millimeter adjustment), saving possible unevenness (stairs, ramps, etc.).

The legs are provided with an outer profile with 4 internal 4mm ribs and an inner profile with 9 internal ribs.

The height of the legs is fixed by means of a steel pin and metal pressure knob (ergonomic), ensuring a total fixation of the height of the legs.
The final adjustment is made with the M12 stainless steel spindle, which is threaded to the leg by means of a stainless steel bushing (not directly to the leg profile)

Ref. PTA5-R: TELESCOPIC FEET WITH REGULATION ANGLE

Legs made of high strength aluminum with an external profile of 50 x 50 mm and terminals made of non-slip rubber and fixed to the profile with double screws.

Its special design allows the leg to be tilted, being able to be used for uneven mounting and ramps.

Its telescopic system allows to obtain multiple heights with a single set of legs (millimeter to millimeter adjustment), saving possible unevenness (stairs, ramps, etc.).

The legs are provided with an outer profile with 4 internal 4mm ribs and an inner profile with 9 internal ribs.

The height of the legs is fixed by a double safety lock; With the metal pressure knob, the desired height is adjusted and set, and as an additional safety measure, the legs are locked by means of an M10 nut, thus ensuring a total fixation of the height of the legs.

Ref. PTA5- F- FIXED LEGS

Legs made of high strength aluminum with 50 x 50 mm reinforced profile with 4 internal 4mm ribs.

The legs are provided with an oversized rubber-injected terminal that prevents any slippage, guaranteeing a perfect fit to all types of surfaces.



Ref. PTA5-N FIXED LEGS WITH ADJUSTABLE SPINDLE

Legs made of high strength aluminum with 50 x 50 mm profile with 4 internal 4mm ribs.

The legs are provided with an M12 spindle with double locking stainless nut, which allows us to adjust its height up to 50 mm, guaranteeing durability and a perfect fit on floors with small slopes.

The leg is provided with a disc injected in non-slip industrial rubber (not plastic), which guarantees a perfect fit to all types of surfaces and prevents marking / damaging the surface (floor, wood, etc.).

UNION SYSTEMS

Each TM440 platform is supplied with two joining systems; connectors that guarantee maximum safety in your assemblies:

TMU-01 Fast anchoring system for TM440, TM440XL, TM440XL, TM300, TM440S and TM441 platforms by joining their profiles (guide). This system, injected in metal with galvanized finish, is designed to prevent the separation of pallets placed at the same height.

The anchor and leveling joint ref. TMU-01 is a very useful component, since it guarantees that there is no space / joint, or unevenness between the modules. Note: 1 unit is included for each platform.

TMU-02 It allows the joining of pallets internally, frame with frame; reinforcing the entire modular composition of the stage. (Made of stainless steel)

Note: For each 4 telescopic legs 70-120 or higher, 1 leg-to-leg connection system (Ref. TMU-04, stainless) is included free of charge

TMU-04 Allows the joining of the pallets by two of its legs (double flange). (Made of stainless steel)

* Four-leg quadruple flange is also available (Ref. TMU-08)

STANDARD MEASURES:

* Ref. TM440 / 1x0.5: Pallet of 1000 x 500 mm (1200 kg / m2). 100% Birch board of 21 mm. Includes connectors: 1xTMU-01 and 1xTMU-02. (Net weight: 15 Kg)

* Ref. TM440 / 1x1: Pallet of 1000 x 1000 mm (1200 kg / m2). 100% Birch board of 21 mm. Includes connectors: 1xTMU-01 and 1xTMU-02. (Net weight: 23.5 Kg)

* Ref. TM440 / 2x0.5: 2000 x 500 mm platform (1200 kg / m2). 100% Birch board of 21 mm. Includes connectors: 1xTMU-01 and 1xTMU-02. (Net weight: 27 Kg)

* Ref. TM440 / 2x1: Pallet of 2000 x 1000 mm (1200 kg / m2). 100% Birch board of 21 mm. Includes connectors: 1xTMU-01 and 1xTMU-02. (Net weight: 42 Kg)

(For other measures consult)

Reviews

No customer comments for the moment.

Write a review

Guil - TM440/2x1

Guil - TM440/2x1

TM440 Modular platform for 50 x 50 mm legs. Maximum load of 1200 kg / m2. 2 x 1m Legs not included.

Write a review