LED Sets Effects

Viewed products

Information

Eurolite - Set LED KLS Laser Bar FX + M-3

Set LED KLS Laser Bar FX + M-3

Set LED KLS Laser Bar FX + M-3 Speaker-system stand

In Stock

Europe Warehouse: 70

More info



  • Control: DMX

51741090 EUROLITE LED KLS Laser Bar FX Light Set

Bar with 2 derbies, 2 spots, white strobe LEDs, laser (RG, 2M), foot switch

  • 4in1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and white strobe LEDs
  • Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
  • Ultra-light ideally suited for mobile use
  • Crossbar with integrated DMX control unit and stand sleeve
  • Comes pre-assembled with practical transport bag
  • Convenient control via wireless foot switch and IR remote control
  • 2 laser diodes project hundreds of red and green laser beams
  • 2 rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each
  • 2 spots three bright RGB LEDs (3in1) each
  • 4 white strobe LEDs
  • Auto, music, master/slave and DMX mode
  • 37 built-in auto and music show programs that include all 4 effect units
  • Addressing and setting via control panel with 4-digit LED display
  • Sound-control via built-in microphone with sensitivity control
  • LED derbies and LED spots individually adjustable and interchangeable
  • Swivel mounting brackets for truss mounting
  • When fog is used, this effect becomes especially attractive
  • IEC terminals for power linking up to 8 units
  • Switch-mode power supply for operation between 100 and 240 volts
  • Control: Wireless footswitch; Sound to light via Microphone; IR remote control; Stand-alone; DMX; preprogrammed in EASY SHOW
  • Effect: Multi beam effect; Strobe effect; laser

Spotlight

  • LED: Spot 2 x separate controlling each with 3 x high-power 3 W 3in1 TCL RGB

Light effect

  • LED: Multi beam effect 2 x separate controlling each with 3 x high-power 1 W RGB (homogenous color mix)

bar

  • LED: Strobe effect 4 x high-power 1 W CW

60004183 OMNITRONIC M-3 Speaker-System Stand

Speaker stand, extendible up to 170 cm, max. load 30 kg

  • Stable speaker stand
  • Black lacquered steel version
  • Telescopic tube with locking pin


Control:DMX
Weight:15.00 kg
51741090 EUROLITE LED KLS Laser Bar FX Light Set
Power supply:100-240 V AC, 50/60 Hz
Power consumption:50 W
IP classification:IP20
Protection class:Protection class I
Power connection:Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Power output:1 x IEC connector (F) mounting version
Fuse:Device fuse 5 x 20 mm T, 1 A Fuse replaceable
Flash rate:0 - 30 Hz
DMX channels:3; 5; 9; 27
DMX input:1 x 3-pin XLR (M) mounting version
DMX output:1 x 3-pin XLR (F) mounting version
Cooling:Cooling fan
Control:Wireless footswitch
Sound to light via Microphone
IR remote control
Stand-alone
DMX
preprogrammed in EASY SHOW
Housing color:Black
Width:132 cm
Height:32 cm
Depth:14.5 cm
Weight:9.65 kg
laser
Laser color:2in1 BCL RG
Laser class:Class 2M
Laser module:R red 100 mW 650nm
G green 30 mW 532nm
Spotlight
LED:Spot 3 x high-power 3 W 3in1 TCL RGB
Beam angle (1/2 peak):13°
Beam angle (1/10 peak):20°
Light effect
LED:Multi beam effect 3 x high-power 1 W RGB (homogenous color mix)
bar
LED:Strobe effect 4 x high-power 1 W CW
Beam angle (1/2 peak):7°
Foot control
Battery:1 x 9.0 V E block 6LR61 alkaline manganese (provided)
Remote control
Battery:1 x Button cell 3.0 V CR2025 lithium manganese built-in
60004183 OMNITRONIC M-3 Speaker-System Stand
Maximum carrying capacity:30 kg
Height:maximum: 1.70 m
minimum: 1 m
Color:Black
Attachment:Flange system Ã? 35mm
Type (general stands):Speaker stand/manual
Material:Steel
Weight:2.90 kg

Reviews

No customer comments for the moment.

Write a review

Eurolite - Set LED KLS Laser Bar FX + M-3

Eurolite - Set LED KLS Laser Bar FX + M-3

Set LED KLS Laser Bar FX + M-3 Speaker-system stand

Write a review