This device allows sequential switching on of the coupled load at all inputs at 1 second intervals. The unit is protected against overload by means of a 63 A magnetothermal.

Each channel has its own pushbutton for turning on / off a specific channel. The maximum load coupled to each channel is 10 A. The bypass function disables the sequence and provides direct power at each output. The front panel includes an additional power outlet (not integrated in the power-on sequence) for powering small power devices.

Each output has LED indicators to indicate status. Includes a USB front jack for connecting a standard USB lamp (included) with its own power switch. The output is made via network sockets. The LINK output allows you to link several units and perform a general power on sequence.

• Ignition sequencer and 8-outlet current distributor.
• Single On / Off switch for each channel.
• Bypass function.
• LED indicator for each channel.
• LINK input for interconnection between different units.
• Additional power for connecting small devices.
• Overload protection thanks to unmagnetothermal 63 A.
• Number of outputs: 8.
• Maximum output load: 10A per output.
• Total load: 63A max.
• On: Sequential (every second).
• Protections: 1 x bipolar circuit breaker 400V 63A.
• Connectors / controllers rear panel: 8 x power connector, 2 x LINK function (XLR 3), 1 x 63A magnetothermal, 1 x grounding.
• Connectors / controllers front panel: 1 x power connector, USB connector (for lamp), 8 x output buttons, 1 x Bypass button.
• Indicators front panel: 8 x active channel (green LED), 1 x plugin, 1 x Bypass (red LED), 1 x on / off (green LED).
• Power supply: 110-240V AC 50 Hz.
• Consumption: 14 kW (max).
• Dimensions (W x H x D): 483 x 44 x 254 mm.
• Weight: 1.8 kg.
• Included Accessories: USB LED lamp.

  Manual Manual All languages ??Dowload